Tunnel Problem

deathreaperz · Commander **Joined**: 20 May 2013 **Location**: Indonesia

Hello...

I decided to make this topic after do some trial and errors on tunneling...

You guys see 2 initiates there

-An initiate in the south tunnel was from north tunnel, crossing the tunnel and successfully out.
-An initiate in the north tunnel that stucked (can't go out from the tunnel) was from south tunnel

I draw/connect the tunnel correctly...

Any reasons/solution for this?

tunnelproblem.png

Description:

Filesize:

124.3 KB

Viewed:

1282 Time(s)

_________________

Bittah Commander · Posted: Fri Apr 15, 2016 5:02 pm Post subject:

Every tunnel path exists out of 2 tubes: 1 for every direction from which you can enter the tunnel.

The problem you described often happens in TS when the length of the 2 tubes is different, so make sure that the length of the tubes matches one another in the map's code.

_________________

E1 Elite · General **Joined**: 28 May 2013

Draw the tunnel lines for 1 cell more on both sides. Even the visible infantry doesn't seem to be out of
the tunnel completely.

Q45's tunnel drawer tool - http://www.ppmforums.com/viewtopic.php?t=37881

deathreaperz · Commander **Joined**: 20 May 2013 **Location**: Indonesia

Got it working, guys... Thanks!

_________________

deathreaperz · Commander **Joined**: 20 May 2013 **Location**: Indonesia

Seems I got a Tunnel problem again, but this is kinda different than before...

The last one was fixed and worked, but these two, they even won't cross the tunnel...

Tangkapan layar 2016-04-16 23.51.34.png

Description:

Filesize:

874.93 KB

Viewed:

1179 Time(s)

_________________

Mig Eater · Posted: Sun Apr 17, 2016 8:42 am Post subject:

Your tubes are incorrectly placed...

tunn.jpg

Description:

Correctly placed tunnel tubes.

Filesize:

336.67 KB

Viewed:

1151 Time(s)

_________________

deathreaperz · Commander **Joined**: 20 May 2013 **Location**: Indonesia

Yeah, MigEater...
I used to use that, and the result was 2 initiates above

_________________

Mig Eater · Posted: Wed Apr 20, 2016 8:39 am Post subject:

BTW are you using the terrain expansion or have you fixed the RA2 tunnel tiles? Because the ones in the standard game aren't set up properly.

_________________

deathreaperz · Commander **Joined**: 20 May 2013 **Location**: Indonesia

Yes, I use the terrain expansion...
RA2 Tunnel Tiles fix? How?

_________________

Mig Eater · Posted: Thu Apr 28, 2016 10:24 am Post subject:

The standard tunnels have the wrong terrain type setting & thus dont work. To fix it you need to open the tunnel tiles in a terrain editor and change the cells at the entrance to the tunnel terrain type. The terrain expansion fixes this tho so you dont need to do anything.

_________________